7
www.empirepaintball.com
SWITCHING OFF YOUR MINI
Push and hold the Power Button on the front foregrip for 2 seconds and the
LED will turn solid RED and then to GREEN. Release button and the MINI will
switch Off.
AUTOMATIC OFF FEATURE
The Empire MINI also has an “Automatic OFF” feature. If you accidentally
leave your MINI powered up, it will shut itself off after approximately 1 hour
of inactivity.
BATTERY LIFE INDICATOR
The MINI also has a Battery Life indicator, located on the back of the
foregrip. If in standard operation and the LED flashes with a GREEN
color then the battery is GOOD, if the LED is ORANGE the battery is fairly
depleted and you should change battery soon, or if the LED is RED then
there is less than 20% of the full battery strength remaining and battery
should be replaced immediately.
EYE FUNCTION
The MINI board is pre-programmed to activate the eye system each time the
marker is powered up. See Section 7 (Break beam Eyes Operation) for more
details.
INSTALLING A LOADER AND PAINTBALLS
The MINI comes equipped to accept 1.03" (outer dimension) standard-gravity
feed loaders as well as most agitating and force-feed loaders. Fit the loader
directly into the feedneck. It might be necessary to adjust the clamp to your
loader using the 3/32" Allen wrench. Always twist the loader in a Clockwise
direction to prevent feedneck thread damage.
The MINI uses .68 caliber, water-soluble paintballs, readily available at
paintball pro-shops, commercial playing fields, and many sporting goods
stores. The paintballs are fed from the loader through the direct vertical feed
port and into the breech of the marker.
6. FIRING THE MINI
Keep your finger out of the trigger guard and away from the trigger, point
the muzzle of your marker in a safe direction at all times during this
process. Be sure your goggles are securely in place and make sure the
MINI marker is off.
Warning- Everyone within firing range should always use paintball approved
eye and face protection in the presence of live paintball markers.
- Place the empty loader onto the marker.
- Be sure that it is securely mounted in place.
- Apply the compressed gas, pressurizing the marker.
- Put the paintballs into the loader.
- Remove the barrel plug, sock or barrel-blocking device.
- Aim the MINI in a safe direction.
- Turn the MINI on: Push the On/Off button for 2 seconds until the LED light
changes from solid Green to solid Red, then release button and LED should
do a rapid flashing Green.
- Aim the MINI at the target.
- Pull the trigger with a smooth squeezing motion.
(40 pages)
(16 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals