10
10. OPTIMUS BOARD
The Empire MINI is driven by an Optimus™ Board. The Optimus™ Board
features several modes and functions that are listed below. The Optimus™
Board is located inside the front foregrip.
Before adjusting Functions, remove the propellant source from the MINI and
install barrel blocking device.
The Optimus™ Board inside your MINI features 5 functions. It uses a 3-color
LED indicator on the backside of the front foregrip to indicate functions and
modes during programming.
To access and set the Optimus™ Board, place MINI on a flat surface with
muzzle pointing to the left. Using a 5/64" Allen wrench, remove the screw
that secures the left side plate to the front foregrip. This will expose the
battery and the Optimus™ Board. Please locate the (A) Function Key, which
is a small black button on the rear of the board, to the left and slightly above
the Power Button (B), marked DIP (see illustration). It is not necessary to
remove the board from the housing in order to manage settings.
FUNCTIONS, MODES
The MINI must be Off to begin managing functions. While the MINI is Off,
press the Function Key to access one of the 5 different functions and make
adjustments.
1. Firing Modes (Solid Red LED)
2. Rate-of-Fire (Solid Green LED)
3. Dwell (Solid Orange LED)
4. BIP Delay (Flashing Red LED)
5. Ramping Point (Quick-Flashing Green LED)
- Once you push the Function Key the appropriate amount of times to get into
the desired function, the LED will flash a specific color per the descriptions
below followed by a number of flashes which will indicate the current setting
in that function.
- To increase or decrease a setting of a function, use the Power Button (B)
and Function Key (A). The Power Button will decrease a setting by one every
time it is pushed. The Function Key will increase a setting by one every time
it is pushed. The setting can be changed when the function you select has
a solid light which will come before the board flashes the current setting.
Example: Press the Function Key 1 time and you will be in “Function 1” which
is “Firing Modes” or press the Function Key 3 times and you will be in
“Function 3” which is “Dwell”.
FIRING MODES
-WILL BE INDICATED BY SOLID RED LED
To get into the Firing Mode Function, make sure the Power is Off, then push
the Function Key one time and LED will turn to Red and then flash to indicate
the Firing Mode that it is currently in. For example the Default mode is Semi-
Auto which will be demonstrated by 1 flash.
(40 pages)
(16 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals