Empire P)-1 Owner's Manual download pdf (Page 25)

29210-0-0911 Page 25

NOTE: Termination cap should pass through the wall restop from

the exterior of the building. Adjust the termination cap to

its nal exterior position on the building.

WARNING: Termination cap must be positioned so that arrow

is pointing up.

Attach the termination cap with the four wood screws provided.

Before attachment of the termination, run a bead of silicone sealant

rated above 250°F on its outside edge too, so as to make a seal

to the exterior wall.

NOTE: Wood screws can and should be replaced with appropriate

fasteners for use on stucco, brick, concrete or other types

of siding.

CAUTION: If exterior walls are nished with vinyl siding (or materials

that could become discolored or warp), it is necessary to install a

vinyl siding standoff.

The vinyl siding standoff will be installed between the vent termination

and the exterior wall. (See Figure 35) This horizontal vent termination

bolts onto the at portion of the vinyl siding standoff, so an air space

will exist between the wall and the termination cap.

Figure 35

HORIZONTAL TERMINATION

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

No comments

Empire P)-1 Owner's Manual Page 25